Features: – It can repairs dents in almost any place on any vehicle. – Easily removes dents from hail, car doors, shopping carts and more without damaging the surface of your car. – It features a arched bridge pulling design that allows the tool to providing maximum pulling power and simple to use. – Repair the car dent without the need of paint repair and no damage to the car paint, convenient and time-saving. – Suitable for repairing the surface dent of car, refrigerator, washing machine, etc.
Model：Depression Repair Puller
Material: Plastic and Aluminum alloy
Color: White and Black
Number of Pieces: 6 PCS
Function: Paint and Decorating / Repair Tools and Kits / Paintless Dent Removal Tools / Car Dent Repair Kit
Paintless Dent Repair Kits Using Steps： – Clean the dent with a clean wet cloth. – Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes. – Use a proper drawing gasket. Large dent requires a large drawing gasket. – Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue. – Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres . – Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent. – Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen. – Clean the repaired place with a clean wet cloth.
Place of Application: Car
Note: – Due to the difference between different monitors, the picture may not reflect the actual color of the product.Thanks. – This product is measured manually,so it may has 0-1CM error.thanks for your understanding.
Product Weight : 130 G / 4.59 Ounces
Product Dimensions (L*W*H) : 230*85*50 MM / 9.06*3.35*1.97 Inches
Package Weight : 130.0 G / 4.59 Ounces
Package Dimensions (L*W*H) : 230*85*50 MM / 9.06*3.35*1.97 Inches